ProductPRODUCT
Featured products
Contact Us
Description
Micro Spray Tape Feature
Micro spray hose is a porous spray hose produced by laser or mechanical perforation method. With different working pressures, spray width of the micro spray hose will change.The micro spraying hose has the advantages of soft spraying, appropriate amount, uniformity, low cost, convenient using and storage.
|
diameter(mm)
|
thickness(mm)
|
roll length(m)
|
holes quantity
|
hole spacing(cm）
|
|
20
|
0.15
|
200
|
3/5/7/9
|
10-40
|
|
25
|
0.2
|
200
|
3/5/7/9
|
10-40
|
|
30
|
0.2/0.3
|
200
|
3/5/7/9
|
10-40
|
|
40
|
0.2/0.3
|
200
|
3/5/7/9
|
10-40
|
|
45
|
0.2/0.3
|
100 |
3/5/7/9
|
10-40
|
|
50
|
0.3
|
100 |
3/5/7/9
|
10-40
|
|
63
|
0.3
|
100 |
3/5/7/9
|
10-40
|
|
75
|
0.3/0.4
|
100 |
3/5/7/9
|
10-40
|
Micro Spray Tape Application
The micro spray hose is mainly suitable for farmland, orchard, vegetable field, forest, grass and flowers, and facility cultivation and agricultural irrigation.
Precautions for use
1. Before laying the micro-spraying belt, use medicine to remove the pests (such as mole crickets, etc.) in the soil to prevent them from harming the crops and biting the micro-spraying belt.
2. When laying, the hole of the micro-spray belt should be upward and the tail should be blocked. Then squeeze with water pump. Wrap the water inlet with gauze (filter mesh) to prevent clogging of the holes. In case of blockage, you can untie the tail and rinse it with clean water for one minute. You can also tap the tube wall gently with your hands and other tools.
3. When using it for the first time, according to your pump pressure and the working length of the micro-spray belt, turn on the switch first. It is better to open a few more switches to prevent the micro-spray belt from bursting due to excessive pressure. If the pressure is not enough, just turn off a few switches. You will know how many switches you turn on next time. If the water is tested on that piece, turn on the switch before changing the piece, and then turn off all the switches on the tested piece to prevent blasting caused by improper use.
4. When changing the stubble, first squeeze the micro-spray belt with a water pump, wash it, roll it up, and put it in a cool place to prevent rats and other things from biting, so that it can be used again next time.
Our advantage
GLOBAL SERVICE
With 12 years of industry expertise, we’ve served 12,500+ businesses worldwide, maintaining an 85% client retention rate.
Material Management
All of our aluminum profile are made aluminum alloy 6005-T5 with surface protection anodic oxidation, hooks and bolts made of stainless steel 304 (SUS 304).
24-hour service
24/7 engineering support with DFM feedback within 4h.High - quality all - round service
Quality Control
Our expert R&D team ensures compliance with international standards: SGS, AS/NZS 1170, and ISO 9001 certified.
Shipment
